CPSC Adopts New ASTM Toy Standard as Mandatory on June 12
The Consumer Product Safety Commission has adopted, as mandatory, effective June 12, 2012, the new ASTM F963-11 toy standard. Changes made to the toy standard by the new version include revisions to the section on heavy metals (e.g., cadmium), the introduction of compositing procedures, and new safety requirements and technical guidance for bath toy projections, acoustics, and other potential safety hazards in toys. As the new standard does not reincorporate the standard for toy chests, that provision from F963-07 remains in effect.
Sign up for a free preview to unlock the rest of this article
If your job depends on informed compliance, you need International Trade Today. Delivered every business day and available any time online, only International Trade Today helps you stay current on the increasingly complex international trade regulatory environment.
(Under the Consumer Product Safety Improvement Act (CPSIA), upon ASTM notifying the CPSC of proposed revisions to ASTM F963, the CPSC must incorporate the revisions into the consumer product safety rule, unless the CPSC notifies ASTM, within 90 days of receiving the notice, that it has determined the proposed revisions do not improve the safety of the consumer product(s) covered by the standard. The CPSC has determined that the proposed revisions in ASTM F963-11 improve the safety of the consumer products covered by the standard, and therefore accepts the revisions as mandatory consumer product safety standards.)
New Version Updates Heavy Metals, Bath Toys, & Other Requirements
The American Society for Testing and Materials (ASTM) states that the revisions incorporated into F963-11 include the following:
- Cadmium and Other Heavy Metals — Limits for heavy metals in toy substrates have been added to the existing surface coating requirements. A soluble approach for determination of heavy elements (e.g. cadmium) in toys and toy components has been maintained as this has been demonstrated to be more closely correlated than total content with the amount of element which is bioavailable, and therefore with risk of toxicity.
- Compositing Procedure for Total Heavy Metal Analysis — Revisions outline detailed procedures for accomplishing this end by specifying the conditions under which compositing is allowable, when a composite result may be relied upon without further testing, and when testing of individual samples must subsequently be performed.
- Bath Toy Projections — Revisions are intended to address the potential hazards that may be presented by vertical, or nearly vertical, rigid projections on bath toys. This requirement is intended to minimize possible puncture or other hazards to the skin that might be caused if a child were to fall on a rigid projection.
- Other revised areas -- Among other revised areas of the standard are sections on jaw entrapment; toys with spherical ends; stability of ride on toys; requirements for squeeze toys attached to rings; use of cords, straps and elastics; packaging film; and yo-yo tether balls.
(See ITT's Online Archives 12012603 and 12020104 for summary of CPSC meeting on 2011 standards and staff recommendation for adoption.)
(On January 1, 2012, CPSC lifted two-year stays of enforcement for the third party testing and certification requirements for lead content, phthalates, and the mandatory standard for toys - ASTM F963-08 prior to this rule's effective date of June 12, 2012, and F963-11 after the effective date (Standard Consumer Safety Specification for Toy Safety). Therefore, all toys designed or intended primarily for children 12 years of age and younger will need to be third party tested and meet the certification requirements if they were manufactured after December 31, 2011. See ITT's Online Archives 11120820 for summary. See also ITT's Online Archives 09020205, 09122920, 11020232, 11020736, 11081011, and 11080315 for summaries of the stays of enforcement for the third party testing and certification requirements for lead content, phthalates, and ASTM F963-08 toy standard.)
ASTM press release (dated 12/15/11) stating ASTM F 963-11 was issued, available here.
ASTM article on new standard, appearing in Jan/Feb 2012 issue of Standardization News, available here.
FAQs on CPSC safety standard for children's toys (currently ASTM F 963-08 (2008) for all toys designed for use by children 14 years of age and younger and ASTM F 963-07ε1 for toy chests) are available here.
ASTM F963-11 can be purchased here.
CPSC Contact - Jonathan Midgett (301) 504-7692