New AD/CV Duties Requested on Fabricated Structural Steel From Canada, Mexico and China
A domestic trade association filed petitions on Feb. 1 with the Commerce Department and the International Trade Commission requesting new antidumping and countervailing duties on fabricated structural steel from Canada, Mexico and China. Commerce will now decide whether to begin AD/CVD investigations on fabricated structural steel that could eventually result in the assessment of AD/CV duties. The petition, filed by the American Institute of Steel Construction, targets steel mill products of various shapes that have been fabricated (and typically custom-manufactured) into articles suitable for erection or assembly into a variety of structures.
Sign up for a free preview to unlock the rest of this article
If your job depends on informed compliance, you need International Trade Today. Delivered every business day and available any time online, only International Trade Today helps you stay current on the increasingly complex international trade regulatory environment.
Fabricated structural steel entered under tariff subheadings 7308.90.30, 7308.90.60 and 7308.90.95 is already subject to a 25 percent Section 301 tariff when imported from China. Additionally, fabricated structural steel under subheadings 7216.99.0010, 7216.99.0090 and 7228.70.6000 is currently subject to Section 232 tariffs, also set at 25 percent, on iron and steel products when imported from all three countries.
Proposed Scope
The petition proposes the following scope for the investigations:
The merchandise covered by this investigation includes carbon and alloy (including stainless) steel products such as angles, columns, beams, girders, plates, flange shapes (including manufactured structural shapes utilizing welded plates as a substitute for rolled wide flange sections), channels, hollow structural section (HSS) shapes, base plates, plate-work components and other steel products that have been fabricated for assembly or installation into a structure (fabricated structural steel). Fabrication includes, but is not limited to, cutting, drilling, welding, joining, bolting, bending, punching, pressure fitting, molding, adhesion and other processes.
Fabricated structural steel products included in the scope of this investigation are products in which: (1) iron predominates, by weight, over each of the other contained elements; and (2) the carbon content is two percent or less by weight.
Fabricated structural steel is covered by the scope of the investigation regardless of whether it is painted, varnished, or coated with plastics or other metallic or non-metallic substances. Fabricated structural steel may be either assembled; disassembled, but containing characteristics or items, such as holes, fasteners, nuts, bolts, rivets, screws, tongue and grooves, hinges, or joints, so that the product(s) may be joined, attached, or assembled to one or more additional product(s); or partially assembled, such as into modules, modularized construction units, or sub-assemblies of fabricated structural steel.
Products under investigation include carbon and alloy steel products that have been fabricated for erection or assembly into structures, including but not limited to, buildings (commercial, office, institutional and multi-family residential); industrial and utility projects; parking decks; arenas and convention centers; medical facilities; and ports, transportation and infrastructure facilities.
Subject merchandise includes fabricated structural steel that has been assembled or further processed in the subject country or a third country, including but not limited to painting, varnishing, trimming, cutting, drilling, welding, joining, bolting, punching, bending, beveling, riveting, galvanizing, coating, and/or slitting or any other processing that would not otherwise remove the merchandise from the scope of the Investigation if performed in the country of manufacture of the fabricated structural steel.
Fabricated structural steel may be attached, joined or assembled with non-steel components at the time of importation. The inclusion, attachment, joining, or assembly of non-steel components with fabricated structural steel does not remove the fabricated structural steel from the scope.
All products that meet the written physical description are within the scope of this investigation unless specifically excluded. Specifically excluded from the scope of this investigation is certain fabricated steel concrete reinforcing bar ("rebar"). Fabricated rebar is excluded from the scope only if (i) it is a unitary piece of fabricated rebar, not joined, welded, or otherwise connected with any other steel product or part; or (ii) it is joined, welded or otherwise connected only to other rebar.
Also excluded from this scope is fabricated structural steel used for bridges and bridge sections. For the purpose of this scope, fabricated structural steel used for bridges and bridge sections is defined as fabricated structural steel that is used in bridges and bridge sections and that conforms to American Association of State and Highway and Transportation Officials ("AASHTO") bridge construction requirements or any state or local derivatives of the AASHTO bridge construction requirements.
Also excluded from this scope are pre-engineered metal building systems. For the purposes of this scope, pre-engineered metal building systems are defined as complete metal buildings that integrate steel framing, roofing and walls to form one, pre-engineered building system, and are designed and manufactured to Metal Building Manufacturers Association guide specifications. Pre-engineered metal building systems are typically limited in height to no more than 60 feet or two stories.
Also excluded from this scope are steel roof and floor decking systems designed and manufactured to Steel Deck Institute standards.
Also excluded from the scope are open web steel bar joists and joist girders that are designed and manufactured to Steel Joist Institute specifications.
The products subject to the investigation are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under subheadings: 7308.90.9590, 7308.90.3000 and 7308.90.6000.
The products subject to the investigation may also enter under the following HTSUS subheadings: 7216.91.0010, 7216.91.0090, 7216.99.0010, 7216.99.0090, 7228.70.6000, 7301.10.0000, 7301.20.1000, 7301.20.5000, 7308.40.0000, 7308.90.9530 and 9406.90.0030.
The HTSUS subheadings above are provided for convenience and customs purposes only. The written description of the scope of the investigation is dispositive.
Commerce Accepting Comments on Petition Support
The Commerce Department is accepting comments on domestic industry support for the petitions to determine whether the petitions meet the dual requirements of support by domestic producers or workers accounting for (1) at least 25% of the total production of the domestic-like product and (2) more than 50% of the production of the domestic-like product produced by that portion of the industry expressing support for, or opposition to, the petition. If the petitions meet these requirements, among others, Commerce will initiate antidumping and countervailing duty investigations. Comments are due by Feb. 21.
Email ITTNews@warren-news.com for a copy of the petitions.